石英砂加工企业职业病危害防护措施与管理对策研究

通过对安徽省石英砂加工企业生产工艺流程和现场进行调查分析,得出矽尘和噪声是两种最主要的职业病危害因素,发现石英砂生产企业矽尘和噪声危害十分严重,生产作业现场未配备任何防护装备和个人防护用品,作业人员接触职业病危害的比率非常高。分析了石英砂加工企业在职业病危害防护与管理方面的欠缺与不足,提出了针对矽尘和噪声危害因素的具体工程防护措施与管理对策,从源头控制和消除职业病危害,保护劳动者的生命安全与健康。     

露天矿山岩质边坡台阶的平台宽度优化

矿山发生局部破坏的边界条件主要是由台阶的几何特征所决定,台阶边坡几何特征主要有台阶坡面角、台阶高度、台阶的平台宽度和台阶组合4要素。在对整体边坡角优化的同时,同样需要对台阶的宽度进行优化。通过分析台阶边坡特征,计算出不同规模破坏的边界条件,进而对矿山台阶的宽度进行优化。通过对一个矿山边坡算例的优化分析,在不改变整体边坡角的前提下,对台阶宽度进行优化,可以避免某些大规模的台阶破坏可能,提高矿山边坡的稳定性。     

综放工作面沿空留巷支护阻力研究

为了计算综放工作面沿空留巷支护阻力,以结构力学理论为基础,分析综放工作面沿空留巷支护阻力计算模型,建立沿空留巷围岩和支护体的结构力学模型,应用超静定结构和静定结构分析支护体与沿空留巷围岩相互作用机制,推导出巷旁支护阻力的计算公式.结果表明,进行沿空留巷支护阻力力学分析时,要考虑顶板极限断裂前和断裂后两种状态下的受力情况,支护阻力与岩层厚度、容重、煤体极限平衡区宽度、跨距、支护体宽度和巷道宽度等因素密切相关.工业性试验表明,该技术的应用是成功而有效的.因此,综放巷内沿空留巷围岩结构力学模型和支护阻力计算公式是合理的,可在类似条件的综放工作面中应用.     

生物表面活性剂产生菌处理水体石油污染物的研究

为研究水体石油污染物的生物处理方法,通过富集培养、蓝色凝胶平板分离初筛、摇瓶复筛等方法从长期被石油污染的油泥中筛选生物表面活性剂产生菌.采用薄层层析显色法和红外光谱法鉴定该菌所产表面活性剂种类,测定表面活性剂的乳化性能、表面张力和临界胶束浓度等性能,并对菌株降解水体石油污染物的影响因素及效果进行了研究.结果表明,筛选出的生物表面活性剂高产菌株LJ2所产表面活性剂为糖脂,其乳化指数为33％,25℃下可将水的表面张力从71.14 mN/m降至27.22 mN/m,临界胶束质量浓度为5 mg/L;当表面活性剂水溶液质量浓度为100 mg/L时,其乳化指数可达50％.温度、降解时间以及NaCl质量分数对菌株LJ2处理水体石油污染效果影响很大.在34℃条件下处理5d,菌株LJ2对质量浓度为2 g/L的水体石油污染物的降解率高达99.5％.研究表明,生物表面活性剂产生菌L J2对水体石油污染物有良好的降解效果,而且该菌还对水体中较高浓度的NaCl有一定的耐受性.     

Mobility and sulfidization of heavy metals in sediments of a shallow eutrophic lake,Lake Taihu,China

The technique of DGT (diffusive gradients in thin films) using three diffusive gel thicknesses was applied to estimate the mobility and bioavailability of heavy metals in sediments and porewater of Lake Taihu, China. The DGT results showed significantly positive correlations between Co, Pb, Cd and Mn, and Ni and Fe concentrations in porewater. Cu and Zn showed a significantly negative correlation with Mn, due to Cu combination with carbonates and Zn derived from agricultural pollution, respectively. The rank order of average concentrations of Co, Ni and Cd at each station was DGT_1.92 > DGT_0.78 > DGT_0.39, suggesting stronger resupply from sediments to porewater when using thicker diffusive gels. Comparing centrifugation and DGT measurements, Co, Ni and Cd are highly labile; Mn and Fe are moderately labile; and Cu, Zn and Pb are slightly labile. The variations of AVS concentrations in sediment cores indicate that metal sulfides in deeper layers are easily diffused into surface sediments.     

汽车道路试验安全管理体系建设研究

为了保障汽车道路试验安全、提高安全管理水平,设计提出汽车道路试验安全管理体系(SMS)总方案。根据OHSAS 18001和安全标准化规范的特点分析,论证了融合两种体系建立道路试验SMS的适用性。并从政策与目标、风险管理、安全保证和安全促进四个模块阐述了该体系的搭建思路、框架内容和搭建步骤。最后,以某自主品牌车企研发中心道路试验的应用情况为例进行效果评估,结果表明:汽车道路试验SMS能有效防控风险、提升试验安全管理水平。     

Experimental and CFD-DEM study of the dispersion and combustion of wheat starch and carbon-black particles during the standard 20L sphere test

The 20L sphere is one of the standard devices used for dust explosivity characterization. One concern about the effectiveness and reliability of this test is related to the particle size variation due to particles' agglomeration and de-agglomeration. These phenomena are related to the turbulent regime of the dust cloud during the dispersion. This variable must be considered since it determines the uncertainty level of the ignitability and severity parameters of dust combustion. In this context, this study describes the influence of the cloud turbulence on the dust segregation and fragmentation through a study combining both, experimental and computational approaches. The behavior of the gas-solid mixture evidenced with the standard rebound nozzle was compared with that observed with six new nozzle geometries. Thereafter, the time-variation of the Particle Size Distribution (PSD) within the 20L sphere was analyzed for two different powders: carbon-black and wheat starch. On the one hand, the turbulence levels and PSD variations were characterized by Particle Image Velocimetry (PIV) tests and granulometric analyses, respectively. On the other hand, a computational approach described the dispersion process with CFD-DEM simulations developed in STAR-CCM + v11.04.010. The simulation results established that the homogeneity assumption is not satisfied with the nozzles studied. Nonetheless, the particles segregation levels can be reduced using nozzles that generate a better dust distribution in the gas-solid injections. Subsequently, an additional first-approach CFD model was established to study the behavior of the combustion step for a starch/air mixture. This model considers the gas-phase reactions of the combustible gases that are produced from the devolatilization of wheat starch ($CO,C{H}_4,C_2{H}_4,C_2{H}_6,C_2{H}_2,$ and $H_2$) and allowed to establish the approximate fraction of the particle mass that devolatilizes, as well as to confirm that the modeling of the pyrolysis stage is essential for the correct prediction of the maximum rate of pressure rise.     

Mapping the public first-aid training landscape: a scoping review

While the public can play a vital role in saving lives during emergencies, intervention is only effective if people have the skills, confidence, and willingness to help. This review employs a five-stage framework to systematically analyse first aid and emergency helping literature from 22 countries (predominately in Asia, Australia, Europe, and the United States). The review covers 54 articles that investigate public first-aid knowledge and uptake of first-aid training (40); public confidence in first-aid skills and willingness to help during an emergency (21); and barriers to or enablers of learning first aid and delivering first aid in an emergency (25). The findings identify high levels of perceived knowledge, confidence, and willingness to help, supporting the contention that the public can play a vital role during an emergency. However, the findings also point to low uptake levels, low tested skill-specific knowledge, and barriers to learning first aid and helping, indicating that the first-aid training landscape is in need of improvement.     

隧道与横通道交叉角对火灾烟气蔓延影响机制研究

为探索隧道与横通道交叉角对火灾烟气蔓延的影响机制，采用FDS数值模拟，研究横通道与隧道不同交叉角情况下火灾烟气温度、浓度、烟气层高度等的变化规律，建立开启火源下风向横通道时隧道内烟气最高温度修正公式，提出烟气纵向蔓延恢复长度的概念，并探讨其影响规律。 结果表明:隧道和横通道交叉角越小，隧道内同一位置烟气层高度越高，当交叉角由90°降低到30°时，烟气层高度最大增加32%；烟气纵向蔓延恢复长度与交叉角及通风速率呈正相关，而与火源功率几乎无关。研究结果对隧道通风排烟系统设计及相关标准的制定具有参考意义。     

Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.